What are the common causes of CT4 motor failure?
2023-02-13 11:53
In CT4 motor In the practical application of CT4 motors, many factors can lead to motor failure. Below are some common problems, let's understand them together.
1. Overheating
Overheating is a major culprit of CT4 motor failure. In fact, the other four reasons listed in this article are partly because they generate heat. Theoretically, with a 10℃ increase in heat, the service life of the winding insulation will be halved. Therefore, extending the service life of the CT4 motor by ensuring it operates at the proper temperature is a better approach.
2. Dust and Pollution
Various suspended particles in the air will enter the CT4 motor and cause various hazards. Corrosive particles may wear down parts, and conductive particles may interfere with part currents. Once particles clog the cooling channels, overheating will be accelerated. Obviously, choosing the correct IP protection level can alleviate this problem to a certain extent.
3. Power Supply Problems
Harmonic currents caused by high-frequency switching and pulse width modulation may lead to voltage and current distortion, overload, and overheating. This will shorten the life of the motor and components, increasing long-term equipment costs. In addition, surges themselves can cause overvoltage and undervoltage. To solve this problem, continuous attention and inspection of the power supply are needed.
4. Humidity
Moisture itself will corrode CT4 motor components. When the humidity in the air mixes with particulate pollutants, it will cause fatal damage to the motor and further shorten the pump's service life.
5. Improper Lubrication
Lubrication is a matter of degree. Over-lubrication or under-lubrication can cause damage. In addition, attention should be paid to contamination in the lubricant, and whether the lubricant used is suitable for the current task.
How to choose a CT4 motor manufacturer?
1. Search the internet and select a manufacturer
Now, with the development of the internet, no matter what we buy, we are used to finding what we want online. Almost all companies have placed themselves in the internet wave, so we can easily make choices. We can find more CT4 motor manufacturers through the network and then make a series of comparisons. We don't have to worry about not finding a good manufacturer.
2. Choose a powerful manufacturer
It is understandable that every buyer wants to choose a capable manufacturer, but how is the strength of a CT4 motor manufacturer reflected? Strength is not something that is said, but something that is done. If you want to know whether a manufacturer is capable, you can check the manufacturer's products and network.
3. Choose a manufacturer with more cooperation cases
In life, when we choose a CT4 motor manufacturer, we want to understand a person, usually through his past work and partners, and this is also true. A good manufacturer should have many cooperation cases. We can first look at their cooperation cases to see if they meet the requirements before making a decision.
4. On-site inspection of the manufacturer
The correct way to choose a CT4 motor manufacturer is to conduct an on-site inspection to get a clearer understanding of the manufacturer's overall strength. During the inspection, check whether the manufacturer has mature production equipment and rich production experience, and check the quality of the finished products.
Fax: 021-67690505
Address: 678 Tongli Road, jiuting town, Songjiang District, Shanghai
